CD Rack

Complete: 2010-06-30
Ring Count: 11115
Weight: 13.2 lb (6.000 kg)

Project Images

Project ImageProject ImageProject ImageProject ImageProject ImageProject ImageProject ImageProject ImageProject Image

Summary

This CD rack was put together in 56 days. The primary weave in use is that of Staggered Captive Inverted Round Sheet (C1) at its minimum AR of 5.4. The sides and shelves were not quick to assemble, due to the tightness of the weave. Connecting the shelves to the sides proved somewhat challenging. I built the unit from the botttom up, building the sides up to the height of where the next shelf was to be connected, then attached a shelf on both sides before moving on. The back was added on afterwards and is pulled tight by its attachment to the sides and the top and bottom shelf. It is also attached to each of the three middle shelves to keep it from pushing back too far when you put cds on the shelves. The unit is quite sturdy and properly supports the weight of the cds. 120 CDs weigh around 27 pounds (12.3kg).

Length: 15.75" (40cm)
Depth: 7" (17.8cm)
Height: 25.875" (65.8cm)
Weight: 13.2 pounds (6kg)
Capacity: 120 CDs (30 per shelf)


Distinct Weaves Used (2)

Ring Types Used (7)